Char-Broil 5438384 5138384 Brass Acme Nut, 1/4-Inch

#ad
#ad
Char-Broil 5438384 #ad - Lp gas cylinders with Type 1 connection and has a maximum working pressure of 250 psi. With this exact replacement, you achieve a tight fit and the thread sealant is included to ensure a leak tight seal and not waste gas from a slow leak. The char-broil 1/4" brass Acme Nut is a perfect replacement fitting on a propane regulator.

Char-Broil 5438384 5138384 Brass Acme Nut, 1/4-Inch #ad - Connection works with 4. 25 - 40 lbs. Maximum working pressure 250 psi. Lp gas cylinders with Type 1 connection. Replacement fitting on a propane regulator. Thread sealant included to ensure a leak tight seal. With easy-adjust knob, this replacement part will serve your grill well. The connection works with 4. 25 - 40 lbs.

More information about Char-Broil 5438384 #ad

Mr. Heater 1/4 Male Pipe Thread x 1"-20 Female Throwaway Cylinder Thread Fitting

#ad
#ad
Mr. Heater F273754 #ad - Solid brass fittings. Durable construction. 1/4-inch mpt by 1-inch by 20 female throwaway cylinder thread. 1-year limited warranty. This quality gas connection fitting will make any Job easier to complete Great for 1-lb tanks.

More information about Mr. Heater F273754 #ad


Similar products



Mr. Heater 1/4 Male Pipe Thread x 1"-20 Male Throwaway Cylinder Thread Fitting

#ad
#ad
Mr. Heater F273755 #ad - 1-year limited warranty. Durable construction. 1/4-inch mpt by 1-inch by 20 female throwaway cylinder thread. Solid brass fittings. 1-year limited warranty. Durable Construction. Male 1"-20 thread. Converts 1/4-inch fpt end to 1-inch by 20 male throwaway cylinder thread. 1/4" male pipe thread. This quality gas connection fitting will make any Job easier to complete Great for 1-lb tanks.

More information about Mr. Heater F273755 #ad


Similar products



Anderson Metals Brass Pipe Fitting, Coupling, 1/4" x 1/4" Female Pipe

#ad
#ad
Anderson Metals 56103-04 #ad - 1/4-inch mpt by 1-inch by 20 female throwaway cylinder thread. When purchasing pipe fittings, shape, as this will affect material type, consider the application, size, and required durability. Durable construction. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F. And its territories. Converts 1/4-inch fpt end to 1-inch by 20 male throwaway cylinder thread. It has female npt threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The company, founded in 1951, is headquartered in Kansas City, MO.

Anderson Metals Brass Pipe Fitting, Coupling, 1/4" x 1/4" Female Pipe #ad - This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, aluminum, plastic, and welded steel. Solid brass fittings. 1/4" male pipe thread. Male 1"-20 thread. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance.

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

More information about Anderson Metals 56103-04 #ad


Similar products



Mr. Heater 1"-20 Male Throwaway Cylinder thread x 1/4" Female Pipe Thread Fitting

#ad
#ad
Mr. Heater F276140 #ad - Solid brass fittings. 1-year limited warranty. This quality gas connection fitting will make any Job easier to complete Great for 1-lb tanks. Converts 1/4-inch fpt end to 1-inch by 20 male throwaway cylinder thread. Durable Construction. All brass construction. 1/4" male pipe thread. Coupling for connecting two pipes with the same diameter in a straight run.

Mr. Heater 1"-20 Male Throwaway Cylinder thread x 1/4" Female Pipe Thread Fitting #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Durable Construction. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. 1-year limited warranty. 1/4" female pipe thread. And its territories. 1"-20 male. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F. 1/4-inch mpt by 1-inch by 20 female throwaway cylinder thread.

More information about Mr. Heater F276140 #ad


Similar products



200,000 BTUs - Camco 59923 Green Propane Acme Nut

#ad
#ad
Camco 59923 #ad - Durable Construction. All brass construction. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F. 1/4" female pipe thread. Connect a 20lb or 30lb propane tank to your regulator/hose assembly. Durable construction. Female national pipe Taper NPT threads for connecting to male threaded pipes.

Thermal shut-off protection. Great for 1-lb tanks. 1-year limited warranty. 1/4-inch mpt by 1-inch by 20 female throwaway cylinder thread. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Camco's green propane acme nut is designed to connect a 20lb or 30lb propane tank to your regulator/hose assembly.

200,000 BTUs - Camco 59923 Green Propane Acme Nut #ad - Durable Construction. Male 1"-20 thread. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. 1-year limited warranty. Coupling for connecting two pipes with the same diameter in a straight run. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

More information about Camco 59923 #ad


Similar products



Smith-Cooper International 8140 Series Brass Mini Ball Valve, Inline, Lever Handle, 1/4 NPT Female, Non-Potable Water Use Only

#ad
#ad
Smith-Cooper International 01728140CC #ad - Ball valves can be referred to as full port or reduced port also known as regular or standard port depending on the inner diameter or the valve. Durable construction. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Plastic-covered lever handle for on/off manual control.

Male 1"-20 thread. Inline valve for connecting two pipes going in the same direction. Ball valves may have a handle or lever that aligns with the ball’s position open or closed for manual operation. Product contains brass which does not meet federal and state requirements for drinking water. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline resulting in lower friction and termed reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe.

Smith-Cooper International 8140 Series Brass Mini Ball Valve, Inline, Lever Handle, 1/4 NPT Female, Non-Potable Water Use Only #ad - Excess flow protection. Converts 1/4-inch fpt end to 1-inch by 20 male throwaway cylinder thread. Durable Construction. Durable Construction. Forged brass for higher corrosion resistance than steel. 1/4" male pipe thread.

More information about Smith-Cooper International 01728140CC #ad


Similar products



LASCO 17-5381 Male QCC-1 by 1/4-Inch Male Pipe Thread Brass Adapter

#ad
#ad
LASCO 17-5381 #ad - Female national pipe Taper NPT threads for connecting to male threaded pipes. Solid brass fittings. Full port flow for higher operating efficiency than standard port. 1-year limited warranty. 1/4" male pipe thread. Not for use in potable drinking water applications. Durable Construction. Forged brass for higher corrosion resistance than steel.

LASCO 17-5381 Male QCC-1 by 1/4-Inch Male Pipe Thread Brass Adapter #ad - 1/4-inch male pipe thread. Plastic-covered lever handle for on/off manual control. 1/4" female pipe thread. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F. Thermal shut-off protection. Female npt threads for connecting to male threaded pipe fittings.

Used for propane or natural gas. 1/4-inch male pipe thread. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Excess flow protection. Converts 1/4-inch fpt end to 1-inch by 20 male throwaway cylinder thread.

More information about LASCO 17-5381 #ad


Similar products



Camco 59013 Single Stage Propane Low Press Regulator

#ad
#ad
Camco 59013 #ad - Durable Construction. Inline valve for connecting two pipes going in the same direction. Full port flow for higher operating efficiency than standard port. 1-year limited warranty. Great for 1-lb tanks. Ul listed. Converts 1/4-inch fpt end to 1-inch by 20 male throwaway cylinder thread. Coupling for connecting two pipes with the same diameter in a straight run.

200, 000 btu/hr. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F. 1/4-inch male pipe thread. Durable Construction. All brass construction. It maintains a constant 11"water column propane pressure and is rate for 200, 000 BTU/HR. And its territories. 1"-20 male. 1/4" female pipe thread. 1/4" female npt inlet x 3/8" Female NPT Outlet.

Camco 59013 Single Stage Propane Low Press Regulator #ad - Brass material lasts long. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Male 1"-20 thread.

More information about Camco 59013 #ad


Similar products



Marshall Excelsior MEGR-230 Low Pressure Single Stage Regulator

#ad
#ad
Marshall Excelsior MEGR-230 #ad - Female npt threads for connecting to male threaded pipe fittings. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F. Used for propane or natural gas. Maintains a constant 11" WC propane pressure. Durable construction. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

1-year limited warranty. Plastic-covered lever handle for on/off manual control. 1/4-inch male pipe thread. 1-year limited warranty. 1-year limited warranty. Durable Construction. 1/4-inch mpt by 1-inch by 20 female throwaway cylinder thread. Excess flow protection. Rated for 200, 000 BTU/hr. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance.

Marshall Excelsior MEGR-230 Low Pressure Single Stage Regulator #ad - Converts 1/4-inch fpt end to 1-inch by 20 male throwaway cylinder thread. 1/4" female pipe thread. Durable Construction. Forged brass for higher corrosion resistance than steel.

More information about Marshall Excelsior MEGR-230 #ad


Similar products



Anderson Metals Brass Hose Fitting, Connector, 3/8" Barb x 1/4" Female Pipe

#ad
#ad
Anderson Metals 57002-0604 #ad - Barbed edges provide positive connection. Connect a 20lb or 30lb propane tank to your regulator/hose assembly. Intended for use with hose clamp or crimp type ferrule. Durable Construction. 1-year limited warranty. And its territories. 1"-20 male. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Product contains brass which does not meet federal and state requirements for drinking water. Adapter shape. Adapter for connecting pipes or fittings of different types. Excess flow protection. Fitting connects to hose on one end and has an NPT female connector on the other. Durable construction. Acme nut x 1/4" male NPT.

Anderson Metals Brass Hose Fitting, Connector, 3/8" Barb x 1/4" Female Pipe #ad - Female npt threads for connecting to male threaded pipe fittings. For use with plastic or rubber hose. Durable Construction. Hose barb - upc flag tagged, barb X female pipe. Male 1"-20 thread. 32 to 250 degree F temperature range.

More information about Anderson Metals 57002-0604 #ad


Similar products